Mountain Bike V Brake Blocks Pads Allen Key Fit 2 Pairs
Features
- High quality V brake blocks are suitable for almost all V Brakes from all manufacturers
- 55mm in length
- Should help reduce brake squeal you get from some longer pads
- Rubber compound is hard wearing and has a wear line so you know when to replace
- Washers provide an easy fitting system that enables you to align the pad on the rim with 1 tool
Product Details
- ASIN: B00M1WB1JE
- Item model number:
- Average Customer Review: Customer Reviews
Product Description
Tools Required for Fitting:1 x 5mm Allen Key
1 x Cleaning Cloth
Fitting Guide:
* After removal of your old pads clean your brake arms of old brake dust with the cleaning cloth.
* Then un-do the 5mm allen nut from one of the blocks.
* Take note of the order of the washers as you need to carefully remove 3 parts.
* You should have left on the block 1 x flat washer 1 x concave washer and 1 x convex washer.
* Place this setup through the space in the brake arm so the pad is against the rim.
* Place the 3 washers you removed back on the block. Convex first then concave and the the flat washer.
* Then screw on the 5mm nut.
* Align the pad against your bike rim so the pad is below the tyre line so it doesn't foul under braking.
* Also make sure the block is not hanging below the rim. This will wear the pad un-evenly and affect braking performance.
* When happy with the position tighten the nut with your allen key.* Repeat for the other side.
Approximate fitting time 10 mins per pair.
