Cabinet surge protection DC – Solar connectors
Product Details
- ASIN: B00DQ7J19A
- Item model number:
- Average Customer Review: Customer Reviews
Product Description
For photovoltaic installations up to 800VDCWith surge protection DC type 2 and switch-disconnector DC
Consistent with UTE C15-712-1
Fitted and pre-wired in Cabinet IP65
Warranty: 2 years
Presentation
According to standard UTE C15-712-1, surge protection is mandatory DC side in the presence of lightning or for certain facilities depending on the length between panels and inverter and lightning strike density (the density of lightning strikes is established by Department).
In addition, revision 1 of standard UTE C15-712-1 requires that the disconnecting device is not integrated into the DC/AC converter.
Lightning protection DC for photovoltaic systems assembled by AIGER Cabinet allows to respond to the two points of the standard and is intended for the protection of the photovoltaic installations upstream of the DC/AC converter.
All our surge protection cabinets comply with standard IEC 60364-7-712 'Facilities in the building - part 7-712 - rules for special locations - photovoltaic power supplies and facilities'.
Characteristics of the SPD
SPD type 2
Plug-in cartridge
Maximum continuous operating voltage: 1000 VDC
Nominal discharge current: 20 kA
Maximum discharge current: 40 kA
Level of protection under the nominal current: 3.6 kV
Response time: < 25 ns
Connection capacity: 4-35 mm2
Operating temperature:-20 ° C to + 80 ° C
Integrated thermal disconnection
Complies with IEC 61643-1
Characteristics of the switch-disconnector
Switch-disconnector 4-pole mounted in series 2 by 2
Maximum current:
32A under 500 VDC
20A under 600 VDC
15A under 800 VDC
Lockable in position 0
Complies with IEC / EN 60947-1 and IEC / EN 60947-309
Characteristics of the Cabinet
Box in ABS grey RAL 7035 modular 8-slot IP65
Dimensions:
