Box SPD AC – DC – Cable glands

    Product Details

    Product Description

    For photovoltaic installations
    SPD type 2 AC
    GFCI 16 A/30mA type has high immunity
    Circuit breaker AC 16 A, lightning protection
    Switch-disconnector DC
    Lightning protection DC type 2
    The AC and DC sides are separated by a bulkhead in accordance with the standard.
    Fitted and pre-wired in Cabinet IP65
    Certification: this
    Warranty: 2 years
    Presentation

    According to standard UTE C15-712-1, the cut-off of emergency device DC side must not be integrated into the inverter.
    According to standard UTE C15-712-1, surge protection is mandatory side AC in the presence of lightning or lightning strike density greater than 2.5 (the density of lightning strikes is established by Department).

    Photovoltaic protection cabinets assembled by AIGER to meet this standard and are therefore intended for the protection of the photovoltaic installations downstream and upstream of the DC/AC converter.

    All of our photovoltaic kits comply with IEC 60364-7-712 'Installations in the building - part 7-712 - rules for special locations - photovoltaic power supplies and facilities.
    The surge AC/DC AIGER Cabinet consists of a modular Cabinet in which are installed and pre-wired:


    Part DC:

    1 switch-disconnector 500V / 32A, 600V / 20A, 800V / 15A
    1 SPD DC type 2


    Part AC:

    1 GFCI AC phase-to-neutral, 16A 30 mA type has high immunity
    1 AC type 2 surge arrester which provides effective protection on the phase and the neutral
    1 AC 16 A circuit breaker for the protection of the arrester 

    The AC and DC sides are separated by a bulkhead in accordance with the standard.


    Characteristics of the AC surge

    SPD type 2
    Withdrawable cartridges
    Common and differential mode protection
    Maximum continuous operating voltage: 275VAC
    Nominal discharge cur

    Customers Who Bought This Item Also Bought