Kit components
1 x Lithium 36v 10ah battery (Chinese Cell) Power out is in the base
1 x Quick release fitting kit including 2 keys
1 x 36V Lithium Quick Battery Charger UK Plug
1 x 4 Pin Postive/Negative Discharge Connector
1 x Fitting and operational Instructions
Specification:
Nominal Voltage: 37V
Nominal Capacity: 10Ah
Cell inside: Li-ion 18650 3.7V 2200mAh
Configuration: 10S5P
Standard Charge Current: 2A (0.2C)
Max. Charge Current: 10A (1C)
Protected Circuit Board (BMS): GLBR-Li10S1505-BMS
Continue Discharge Current: 15A
Peak Discharge Current: 30A
Full Charged Voltage: 42V (4.2V per cell)
Charge Cut-off Voltage: 42.5V (4.25V per cell)
Discharge Cut-off Voltage: 25V (2.5V per cell)
Battery Net Weight: 3.44Kg
Connector Charger: Input: Male Belling-Lee (IEC 169-2) / Output: 4-pin RGB Connector (Included)
Operating Temperature: Charging - 0C 45C, Discharge - -20C 55C
Storage Temperature: (Recommended to store 20 5C for long term storage)
Life Cycle: >800 times (80% of initial capacity at 0.2C rate, IEC Standard)
Not for commercial use
Fuse type: Circuit protection board / fuse not connected or utilised
Battery type: Intelligent Battery with controlled discharge to a safe empty state
Charger Input Connector Dimensions
Outer diameter of silver Belling-Lee (IEC 169-2) plug 10mm
Inner diameter of silver Belling-Lee (IEC 169-2) end plug 8mm
Diameter of the silver Belling-Lee (IEC 169-2) central pin 4mm