PLEASE READ BEFORE ORDERING
It is very important that you purchase the correct size. To measure for your size you will need to obtain 2 measurements:
1. Measure around the arm, past the elbow where you will wear the cast cover
2. Measure around the widest part of your plaster cast, bandage or splint
Using the above 2 measurements, please match which size you best fit into:
[Small - Medium] is suitable for limb circumference 15-31cm
[Large - Extra Large] is suitable for circumference 31-48cm
For further information refer to picture 2, and if you are still unsure please contact us via Amazon for assistance before you buy!
Directions:
STEP 1 - Hold the outer plastic ring and stretch silicone diaphragm outwards - see image
STEP 2 - Place the hand inside the cast cover- see image
STEP 3 - Once the hand is in, whilst still holding silicone diaphragm stretched, pull the cover all the way up the arm until it goes no further - see image
STEP 4 - Griping the plastic ring, gently pull down, the silicone seal will remain snugly in contact with the skin- see image
STEP 5 - To remove simply pull down cover using the outer plastic ring
STEP 6 - Please take care when removing as pulling at the vinyl can result in the product tearing
STEP 7 - It is recommended that the product is allowed to dry naturally after use – place on shower rail and allow to drip dry
Please kindly note:
Designed for SINGLE PERSON use
Latex free
Please ensure you take care while attempting to grip items whilst wearing this product as they can slip out
NOT suitable for undressed or open wounds