Cabinet surge protection DC bi-tracker – Solar connectors
Product Details
- ASIN: B00FMFF5FI
- Item model number:
- Average Customer Review: Customer Reviews
Product Description
For photovoltaic installations up to 800VDCConnecting 2 x MPPT
2 with 2 SPDs DC switch-disconnectors DC
Consistent with UTE C15-712-1
Fitted and pre-wired in Cabinet IP65
Warranty: 2 years
Presentation
According to standard UTE C15-712-1, surge protection is mandatory DC side in the presence of lightning or for certain facilities depending on the length between panels and inverter and lightning strike density (the density of lightning strikes is established by Department).
In addition, revision 1 of standard UTE C15-712-1 requires that the disconnecting device is not integrated into the DC/AC converter.
Lightning DC bi-tracker cabinets assembled by AIGER to reply to two points of the standard and are therefore intended for the protection of the photovoltaic installations upstream of the DC/AC converter.
Our photovoltaic kits comply with IEC 60364-7-712 'Installations in the building - part 7-712 - rules for special locations - photovoltaic power supplies and facilities.
The SPD bi-tracker kit consists of a modular Cabinet in which are installed:
2 switch-disconnectors DC 4-pole to ensure the cut-off installation support
2 SPDs DC type 2
Characteristics of surge arresters
Surge arresters type 2-withdrawable cartridges
Maximum continuous operating voltage: 1000VDC
Nominal discharge current: 20ka peak current
Maximum discharge current: 40kA
Level of protection under the nominal current: 3, 6kV
Response time: < 25ns
Signalling of end of life: Yes
Connection capacity: 4-35mm 2
Integrated thermal disconnection
Complies with IEC 61643-1
Characteristics of the switch-disconnectors
Switch-disconnectors 4 poles connected in series 2 by 2
Maximum current: 2x32A 500vdc, 2x25A under 600VDC, p0050f0075 under 800VDC
Lockable in
