Box SPD AC – DC bi-tracker – Cable glands
Product Details
- ASIN: B00FMFEY3C
- Item model number:
- Average Customer Review: Customer Reviews
Product Description
For photovoltaic installationsSPD type 2 AC
GFCI 16 A/30mA type has high immunity
Circuit breaker AC 16 A, lightning protection
2 switch-disconnectors DC
2 SPDs 1000VDC type 2
Fitted and pre-wired in Cabinet IP65
Consistent with UTE C15-712-1
Warranty: 2 years
Presentation
According to standard UTE C15-712-1, the cut-off of emergency device DC side must not be integrated into the inverter.
According to standard UTE C15-712-1, surge protection is mandatory side AC in the presence of lightning or lightning strike density greater than 2.5 (the density of lightning strikes is established by Department).
Photovoltaic protection cabinets assembled by AIGER to meet this standard and are therefore intended for the protection of the photovoltaic installations downstream and upstream of the DC/AC converter.
All of our photovoltaic kits comply with IEC 60364-7-712 'Installations in the building - part 7-712 - rules for special locations - photovoltaic power supplies and facilities.
The surge AC/DC bi-tracker kit consists of a modular Cabinet in which are installed and pre-wired:
Part DC:
2 switch-disconnectors 500V / 32A, 600V / 20A, 800V / 15A
2 SPDs 1000VDC type 2
Part AC:
1 GFCI AC phase-to-neutral, 16A 30 mA type has high immunity
1 AC type 2 surge arrester which provides effective protection on the phase and the neutral
1 AC 16 A circuit breaker for the protection of the arrester
The AC and DC sides are separated by a bulkhead in accordance with the standard.
Characteristics of the AC surge
SPD type 2
Withdrawable cartridges
Common and differential mode protection
Maximum continuous operating voltage: 320VAC
Nominal discharge current: 20ka peak current
Maximum discharge current: 40kA
Level o
