Features
- One-piece design for maximum protection
- Heavy duty 500D x 500D PVC vinyl (top)
- 13"(33cm) width pad fully covers most trampoline springs and frame, for maximum protection of possible injuries
- 4"(10cm) side skirt overlaps full trampoline frame. EPE foam inside, shock absorbing, high density, closed cell foam
- Please Look For The Quality Goods Of "Zupapa"!
Product Details
Product Description
How to measure your trampoline pad: (to measure the corrct size of the trampoline pad you need to buy, you must measure and make sure the right size of your trampoline frame. And the size you measure out from the frame is the size of the pad which you need to buy)
1. To find the diameter of your round trampoline, start at the outer metal edge of the trampoline.
2. Measure straight across to the opposite side, to the outer metal edge of the trampoline
3. Then measure the frame diameter again, but measure perpendicular to where you just measured.
4. Take the average of the 2 measurements, and that should be your approximate trampoline size.
5. Measuring twice this way will help ensure that you get an accurate measurement in case the frame is bent or damaged, or the trampoline is not sitting on level ground.
10ft Replacement trampoline padding to fit ANY make of Round 10ft trampoline. This is the high quality PVC padding, not the cheaper PE covered padding which isn't as hard wearing, and certainly doesn't look as good- (0.4mm PVC sheet with 20mm sponge pad). The padding is 20mm at the edge of the trampoline where the top ring of the frame is, and is 6mm across the top of the springs. Also Available in Red Or Green. How to measure your trampoline- Your trampoline should be measured across its diameter, that's across the top of the trampoline from one side to the other, including the existing spring padding. The size will most likely be 8ft, 10ft, 12ft, 13ft or 14ft, although other sizes do exist. If you are not sure exactly which size you require feel free to contact us with the diameter measurements.