Kit components
1 x Lithium 48V 10Ah battery (Chinese Cell) Power out is on the key switch casing
1 x Quick release fitting kit including 2 keys
1 x Female IEC Connector Discharge Wiring Loom
1 x 48V Battery Charger
1 x Fitting and operational Instructions
Full Specification
Please allow a certain tolerance to the stated specification as different motors and states of charge apply different draw / European made kits may offer different specification within the same voltage and amperage but they are significantly higher priced.
Specification:
This battery can work with an electric hub motors 1000 watts or below
Nominal Capacity: 10 Ah
Nominal Voltage: 48.1 v
Cell Inside: Li-ion 18650 3.7V 2200mAh
Configuration: 13S5P
Standard Charge Current: 5 A
Max. Charge Current: 10 A (1C)
Protected Circuit Board(BMS): GLBR-Li13S1505-BMS
Continue Discharge Current: 30 A
Peak Discharge Current: 30 A
Full Charged Voltage: 54.6V (4.2V Per Cell)
Charge Cut-off Voltage: 45.25V (4.2V Per Cell)
Discharge Cut-off Voltage: 32.5V (2.5V Per Cell)
Battery Net Weight: 4.09 kg
Overall Length: 395 mm / 15.55 inches
Overall Width: 75 mm / 2.95 inches
Overall Height: 110 mm / 4.33 inches
Overall Fixing Bracket Length: 360 mm / 14.17 inches
Connector Charger: Input: Male Belling-Lee (IEC 169-2) / Output : Black Female IEC Plug Connector (INCLUDED)
Operating Temperature: Charging - 0C 45C, Discharge - -20C 55C
Storage Temperature: (Recommended to store 20 5C for long term storage)
Life Cycle: >800 times (80% of initial capacity at 0.2C rate, IEC Standard)
Not for commercial use